Table of Contents
Advertisement
Installing the Server Blade and Options
To remove a hard drive blank:
1. Press and hold the port-colored release button (1).
NOTE: Port-colored items indicate hot-plug components.
2. Pull the blank out of the drive bay (2).
Figure 2-10: Removing a hard drive blank
NOTE: Store the hard drive blank for future use.
To install a hard drive blank, simply align the blank with the empty bay and slide the
blank into the bay until the locking button engages.
SCSI ID Numbers
The server blade hot-plug SCSI hard drives have unique SCSI IDs that the system
automatically sets. The IDs number from top to bottom on each server blade.
Figure 2-11 shows SCSI IDs for the ProLiant BL20p server blade.
IMPORTANT: Always populate hard drive bays starting with SCSI ID 0.
2-14
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Advertisement
Table of Contents
