Compaq ProLiant 5500 Setup And Installation Manual page 132

SCSI Cable Usage Matrix for Duplex Mode
Controller Hot-Plug SCSI Hard
Drives in Internal Drive
Use cable option
Smart-2 Array
kit 306585-B21.
Controller, /P,
This kit includes
/DH With
the loop back SCSI
Loopback SCSI
cable kit and a
Option
SCSI slot bracket.
Connect 19-inch
point-to-point non-
terminated SCSI
cable (199606-
007) from the
internal SCSI
connector of the
optional controller
board to SCSI Input
0 of the duplex
board.
Connect 8.75"
external loopback
SCSI cable from
external SCSI
connector of
optional controller
board to a SCSI
slot bracket. Install
this bracket in an
unused slot.
Connect 20-inch
cable shipped with
the optional
controller board
from SCSI slot
bracket to SCSI
Input 1 of duplex
board.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Continued
2/4 DAT Drive
4/8 DAT Drive
Cage Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
Tape Drives and CD-
ROMs are not supported
using a SMART-2 Array
Controller
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
7-25
35/70 DLT Drive
Tape Drives and CD-
ROMs are not
supported using a
SMART-2 Array
Controller
Continued