Standard Scsi Simplex Configuration; Simplex Board Connectors - Compaq ProLiant 5500 Setup And Installation Manual

7-8 Cabling for Wide-Ultra SCSI-3

Standard SCSI Simplex Configuration

Compaq ProLiant 5500 and 5500R servers are shipped standard in the simplex
mode, which connects all drives from the hard drive backplane board
(simplex board) to SCSI Port 1 on the peripheral board.

Simplex Board Connectors

In the Compaq ProLiant 5500 and 5500R server, the simplex board has one
SCSI input channel, designated SCSI Input 0. This connector is shown in
Figure 7-5.
Figure 7-5.
1 Simplex board power connector
2 SCSI Input 0
3 Removable media power connector
Simplex board connectors
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
1 2 3