Compaq ProLiant 5500 Setup And Installation Manual page 65

2. Remove one of the terminator boards by turning the retaining knob
counterclockwise, releasing the side tabs and pulling up as shown in
Figure 4-3.
2
Figure 4-3. Removing the terminator board
3. See Figure 4-4 for processor installation procedure.
2
Figure 4-4. Installing the processor
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
2
1
3
3
2
1
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
4-7