Compaq ProLiant 5500 Setup And Installation Manual page 128

SCSI Cable Usage Matrix for Duplex Mode
(Duplex enabler board installed on drive cage backplane)
Controller Hot-Plug SCSI Hard
Drives in Internal
Drive Cage
Integrated Connect 19-inch
Controller point-to-point
Port 1 non-terminated
SCSI cable
(199606-007)
from SCSI Port 1
to SCSI Input 0
of duplex board.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Table 7-7
2/4 DAT Drive
4/8 DAT Drive
Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
Connect 22-inch 3-
device terminated SCSI
(199616-010) from SCSI
PORT 1 to the removable
media bay devices.
Use 50 to 68 pin adapter
(199618-001) if needed.
See Note 2
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
7-21
35/70 DLT Drive
Connect 22-inch
3-device
terminated SCSI
cable (199606-
010) from SCSI
PORT 1 to the
removable
media bay
devices.
Continued