Compaq ProLiant 5500 Setup And Installation Manual page 162

Power Cord Set Requirements - By Country
Country
Singapore
Sweden
Switzerland
United Kingdom
United States
Notes:
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
cord set fittings (appliance coupler and wall plug) must bear the certification mark of the
agency responsible for evaluation in the country where it will be used.
2. Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall plug must be
a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or VCTF,
2
3-conductor, 1.0 mm conductor size. Wall plug must be a two-pole grounding type with a
Japanese Industrial Standard C8303 (7A, 125V) configuration.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Continued
Accredited Agency
PSB or PUB
SEMKO
SEV
BSI
UL
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
Applicable Note Numbers
1
1
1
1
2
2
conductor size. Power
C-3