Taiwanese Notice; Laser Devices; Laser Safety Warnings; Compliance With Cdrh Regulations - Compaq ProLiant 5500 Setup And Installation Manual

Pentium ii xeon and pentium iii xeon processor-based servers
Hide thumbs Also See for ProLiant 5500:
Table of Contents

Advertisement

A-6 Federal Communications Commission Notice

Taiwanese Notice

Laser Devices

All Compaq systems equipped with a laser device comply with safety
standards, including International Electrotechnical Commission (IEC) 825.
With specific regard to the laser, the equipment complies with laser product
performance standards set by government agencies as a Class 1 laser product.
The product does not emit hazardous light; the beam is totally enclosed during
all modes of customer operation and maintenance.

Laser Safety Warnings

Compliance with CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and
Drug Administration implemented regulations for laser products on August 2,
1976. These regulations apply to laser products manufactured from August 1,
1976. Compliance is mandatory for products marketed in the United States.
WARNING: To reduce the risk of exposure to hazardous radiation:
Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
Do not operate controls, make adjustments, or perform
procedures to the laser device other than those specified
herein.
Allow only Compaq Authorized Service technicians to repair
the laser device.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant 5500r

Table of Contents