Scsi Cable Connectors - Compaq ProLiant 5500 Setup And Installation Manual

SCSI Cable Connectors

To help identify the SCSI cables required for ProLiant 5500 and 5500R server
installation, refer to the following illustrations. Keep in mind these
characteristics:
All Compaq ProLiant 5500 and 5500R SCSI connectors are Wide-Ultra
68-pin connectors.
External SCSI cables have a round wire with securable connectors.
Internal SCSI cables have a flat ribbon wire with push-on connectors.
Compaq SCSI cables are keyed so that they cannot be installed
incorrectly.
Fast-Wide SCSI-2 (wide SCSI) internal ribbon cables are physically
smaller (narrower) than the Fast-SCSI-2 (standard SCSI) cables.
Figure 8-1.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
External/Internal Fast Wide SCSI-2 (Wide SCSI) 68-pin connector
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
8-3