Compaq ProLiant 5500 Setup And Installation Manual page 117

7-10 Cabling for Wide-Ultra SCSI-3
Controller
Integrated
SCSI-Port 1
Controller
SCSI Cable Usage Matrix for Simplex Mode
Hot-Plug SCSI Hard
Drives in Internal
Drive Cage
Shipping
configuration:
A 19-inch point-
to-point non-
terminated SCSI
cable (199606-
007) is
connected from
SCSI Port 1 to
SCSI Input 0 of
Simplex board.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Table 7-3
2/4 DAT Drive
4/8 DAT Drive
Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
In Simplex mode, the
recommended use for SCSI
Port 1 is for the hard drives. If
SCSI Port 2 is unavailable for
removable media bay devices:
Connect 22-inch 3-
device terminated SCSI
cable (199616-010) from
SCSI Port 1 to the
removable media bay
devices.
Use 50 to 68 pin adapter
(199618-001) if needed.
See note 1.
35/70 DLT Drive
In Simplex mode, the
recommended use for SCSI
Port 1 is for the hard drives.
If SCSI Port 2 is unavailable
for removable media bay
devices:
Connect 22-inch 3-
device terminated SCSI
cable (199616-010)
from SCSI Port 1 to the
removable media bay
devices.
Continued