Compaq ProLiant 5500 Setup And Installation Manual page 148

8-12 Wide Ultra2 SCSI Cabling
Controller
Integrated Dual
Channel Wide-
Ultra SCSI-3
Controller Port 1
or Port 2
See Note 1
64 Bit Dual
Channel Wide
Ultra2 SCSI
Adapter
See Note 1
Smart Array
3200 Controller
Smart Array 221
Controller
See Note 1
NOTE 1: Wide Ultra2 transfer rates not supported on this controller.
NOTE 2: No more than 4 Wide Ultra2 non hot-plug hard drives can be connected to one multi-
device cable.
SCSI Hardware Device Cabling
Wide Ultra2 Hot-
Plug Hard Drives
in Wide Ultra2
Hot-Plug Drive
Cage
Connect the
19" pt. to pt.
cable, P/N
199606-007
from Port 1 or
Port 2 to the
hot-plug
backplane.
Connect the
19" pt. to pt.
cable, P/N
199606-007
from the HD68
controller
connector to
the hot-plug
backplane.
Connect the
19" pt. to pt.
cable, P/N
199606-007
from the HD68
controller to the
hot plug
backplane.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Table 8-3
Wide Ultra2 or
Wide Ultra Non
Hot-Plug Hard Drives
in Removable Media
Bays
Connect the 3-
device LVD HD68
cable, P/N 269157-
008, to Port 1 or
Port 2 connector.
Connect the 3-
device LVD HD68
cable, P/N 269157-
008 to the HD68
controller.
See Note 2
Connect the 3-
device LVD HD68
cable, P/N 269157-
008 to the HD68
controller
connector.
See Note 2
4/8 DAT Drive,
12/24 DAT Drive,
SCSI CD-ROM,
20/40 DLT, and
35/70 DLT Drive
Connect the 3-
device LVD HD68
cable, P/N
269157-008, to
Port 1 or Port 2
connector.
Connect the 3-
device LVD HD68
cable, P/N
269157-008 to
the HD68
controller .
Connect the
68/50-pin adapter
to the device, if
necessary.
Not Supported.