Removal Of The Fan Assembly - Barco FLM series Service Manual

24. Fan replacements

24.4.1 Removal of the fan assembly

Remove the lamp cover and take out the lamp house.
Necessary tools
• Allen key 3 mm
• Flat screws driver 7 mm
• Nut driver 7 mm
How to remove the fan
1. Turn out the 5 indicated screws with an Allen key 3 mm.
Image 24-26
Partial lamp house removal
2. Slide out the side panel of the lamp cabinet.
Image 24-27
3. Pull out the cable with connector from behind the plate and disconnect the fan.
250 R59770072 FLM SERIES 19/03/2007