26. Power input
26.3.1 Removing the mains switch
Before starting with the removal procedure, follow first the general access procedures as given in "Power
input", page 287.
Necessary tools
•
Screwdriver 7 mm
•
Allen key 2.5 mm
How to remove the mains switch
1. Remove the indicated connection screws at the back side of the mains switch and slide off the eye connectors.
Do not drop the washers inside the projector.
Image 26-12
Mains switch replacement
2. Turn out both screws on the front side of the mains switch.
3. Slide out the mains switch.
294
R59770072 FLM SERIES 19/03/2007