Heat Exchanger - Barco FLM series Service Manual

17. HEAT EXCHANGER

About this chapter
This chapter describes who to replace a heat exchanger.
Functionality
The heat collected, via the cooling circuit in the different parts inside the projector is extracted to the ambient in the heat exchanger.
Image 17-1
Order info
Order number
B4009232K
Overview
• Removing the defective heat exchanger
• Disassembling the heat exchanger assembly
• Assembling the new heat exchanger
Mounting the heat exchanger assembly into the projector
•
R59770072 FLM SERIES 19/03/2007
Description
Heat exchanger assembly for FLM projector.
17. Heat exchanger
179