Lens Holder - Barco FLM series Service Manual

14. LENS HOLDER

About this chapter
This chapter describes how to replace the complete lens holder with build in motors for lens manipulation and the adjustment pro-
cedure.
Functionality
Next to securing the lens, the lens holder makes it possible to shift, tilt and swing the lens plane with respect to the DMD plane of
the projector. This adjustment mechanism ensures that the projected image can be perfectly focused on the screen. Note that the
motors required for horizontal and vertical shift are built-in.
Parts
D
A
B
C
D
Image 14-1
A Lock screws of the focus adjustment plate.
B Screws with retaining springs for pressuring the focus adjustment plate.
C Lens plug socket (for motorized zoom and focus).
D Focus adjustment plate of the lens holder.
E Lock screws of the tilt mechanism.
F Lens holder tilt adjustment screw.
G Lens holder swing adjustment screw.
H Lock screws of the swing mechanism.
Order info
Order No.
R848500K
Overview
• Removing the lens holder
• Installing the lens holder
• Adjusting the lens holder
R59770072 FLM SERIES 19/03/2007
E E
Description
FLM lens holder.
A
A
F
G
H
D
H
14. Lens holder
129