15.2 Mounting a new vertical shift motor
Necessary tools
•
Allen key 3 mm
•
Allen key 2.5 mm
•
Allen key 2 mm
•
Allen key 1.5 mm
How to mount
1. Fixate the small plate with 2 screws on the motor. Fold the wires in the same direction of the rounded side of the plate.
Image 15-6
2. Insert the motor in its compartment with the rounded side of the mounted plate upwards.
Image 15-7
Mount motor
3. Slide the axe on the motor, turn in both fixation screws A and fixate the axe on the motor with the set screw B.
R59770072 FLM SERIES 19/03/2007
15. Vertical and Horizontal shift motors
143