28.3 Installation of the start pulse generator
Necessary tools
•
10 mm nut driver.
•
3 mm Allen key.
•
6 x 120 mm flat screw driver.
How to install the start pulse generator?
1. Place the start pulse generator into its position inside the projector.
Caution:
Gently guide the thick wires through the frame opening. Make sure that the lamp house is removed from the projector.
Image 28-6
2. Fasten the 3 captive screws (S) of the start pulse generator as illustrated, using a flat screw driver.
Image 28-7
3. Install the cover of the start pulse generator as illustrated. The cover has to be fasten with 5 hexagon socket head cap screws.
Use for that a 3 mm Allen key.
R59770072 FLM SERIES 19/03/2007
S
S
S
28. Start pulse generator
309