Finalizing The Replacement - Barco FLM series Service Manual

24. Fan replacements

24.5.5 Finalizing the replacement

Necessary tools
Flat screwdriver 3 mm
What to do
1. Rotate the heat exchanger assembly back and slide it into the projector.
Image 24-52
2. Fasten both fixation screws.
3. Connect those cables which where disconnected and tie up the cables where necessary.
4. Insert the light processor assembly, see "Installing the light processor", page 106.
5. Install the side cover, see "Installation of the side cover", page 81.
266 R59770072 FLM SERIES 19/03/2007