Removing The Pump - Barco FLM series Service Manual

18. Cooling pump

18.3.1 Removing the pump

Before removing the pump you have to drain the cooling circuit first.
Necessary tools
• Knife
• Allen key 3 mm
• Universal plier
How to remove the pump
1. Disconnect the pump electrically.
Image 18-8
Electrical disconnection
2. Cut both hoses (1, 2) just next to the clip.
Remove both clips with a universal plier. Push both clip tongs to each other in order to open the clip.
3
Image 18-9
Removing the pump
198
2
1
3
R59770072 FLM SERIES 19/03/2007