Removal Of The Horizontal Lens Motor - Barco FLM series Service Manual

15. Vertical and Horizontal shift motors

15.3 Removal of the horizontal lens motor

Before you can start with the removal of the motor, the lens holder must be built out, see "Removing the lens
holder", page 130 for more explanation on how to build out.
Necessary tools
• Allen key 3 mm
• Allen key 2.5 mm
• Allen key 2 mm
• Allen key 1.5 mm
How to remove
1. Remove the 4 screws a and take off cover b.
a
a
Image 15-10
Remove motor cover plate
2. Turn out screw c.
3. Loosen both screws d and push out axe e.
146
a
b
a
c
R59770072 FLM SERIES 19/03/2007