18.1.3 Closing the pump
Necessary tools
Phillips head screwdriver
How to close the pump
1. Slide the pump cover with hose on the pump body. Make sure the sealing ring is not damaged and is on its place.
Image 18-5
Closing pump
2. Turn in the 4 screws.
Tip:
To optimize the sealing and to save the sealing ring, turn in the screws crosswise.
How to fill the circuit and expel the air
To fill the cooling circuit, see "Filling the liquid cooling circuit", page 163 with excluded light processor.
For expelling air, see "Expelling air from the liquid cooling circuit", page 170.
For pressurizing the cooling circuit, see "Pressurizing the liquid cooling circuit", page 172.
R59770072 FLM SERIES 19/03/2007
18. Cooling pump
193