8000 → 8001: Shutter Related Errors - Barco FLM series Service Manual

3.8 8000 → 8001: Shutter related errors
Error 8000 : "Opening shutter failed"
This is a warning.
Situation
Disconnected wire unit of the
shutter motor
Obstructed shutter plate.
Twisted shutter plate.
Malfunction motor of the shutter
assembly.
Image 3-23
Error 8001 : "Closing shutter failed"
This is a warning.
Situation
Disconnected wire unit of the
shutter motor
Obstructed shutter plate.
Twisted shutter plate.
Malfunction motor of the shutter
assembly.
Defect end of range switch.
R59770072 FLM SERIES 19/03/2007
Solution
Reconnect the wire unit (ref SH image 3-23 and image 3-20) of the shutter motor with
the Formatter Interface Board (FIB)
Check if nothing is obstructing the shutter plate.
Replace the shutter assembly. See "Shutter replacement", page 203.
Replace the shutter assembly. See "Shutter replacement", page 203.
Solution
Reconnect the wire unit (ref SH image 3-23 and image 3-20) of the shutter motor with
the Formatter Interface Board (FIB)
Check if nothing is obstructing the shutter plate.
Replace the shutter assembly. See "Shutter replacement", page 203.
Replace the shutter assembly. See "Shutter replacement", page 203.
Replace the defect switch.
3. Troubleshooting
SH
55