Input & Communication Unit - Barco FLM series Service Manual

9. INPUT & COMMUNICATION UNIT
About this chapter
This chapter describes how to replace the complete input & communication unit or one of its input modules. Hot swapping of this
unit is not allowed. Projector must be switched off.
Parts
Image 9-1
1 LCD panel.
2 Local key pad.
3 5 Cable input module.
4 DVI input module.
5 HDSDI - SDI input module.
6 Communication unit.
7 Pixel Map Processor (PMP)
Order info
Order number Description
R848591K Input & communication unit for FLM R20+
R9854430 5 Cable input module.
R9854440 High bandwidth data input module (RGB).
R9854450 HDSDI - SDI input module.
R9854460 DVI input module.
R848607 Cover plate for unused input slot.
Overview
• Removal of the input & communication unit
• Installation of the input & communication unit
• Removal of an input module
• Installation of an input module
R59770072 FLM SERIES 19/03/2007
7
9. Input & communication unit
2
1
6
3
4
5
95