General Instructions; Bmw Motorrad; Abs Pro - BMW S 1000 RR Rider's Manual

General instructions

10
BMW Motorrad recommends
the use of parts and accessories
196
for your motorcycle that are ap-
proved by BMW for this purpose.
Genuine BMW parts and ac-
cessories and other products
which BMW has approved can
be obtained from your authorised
BMW Motorrad dealer, together
with expert advice on their install-
ation and use.
These parts and products have
z
been tested by BMW for safety,
function and suitability. BMW
accepts product liability for them.
Conversely, BMW is unable to
accept any liability whatsoever
for parts and accessories which it
has not approved.
Also bear in mind the informa-
tion on the effect of wheel size
on suspension-control systems
( 171).
CAUTION
Use of other-make products
Safety risk
BMW Motorrad cannot exam-
ine or test each product of out-
side origin to ensure that it can
be used on or in connection
with BMW vehicles without
constituting a safety hazard.
Country-specific official author-
isation does not suffice as as-
surance. Tests conducted by
these instances cannot make
provision for all operating con-
ditions experienced by BMW
vehicles and, consequently,
they are not sufficient in some
circumstances.
Use only parts and accessor-
ies approved by BMW for your
vehicle.
Whenever you are planning
modifications, comply with all
the legal requirements. Make
sure that the vehicle does not
infringe the national road-vehicle
construction and use regulations
applicable in your country.

BMW Motorrad

ABS Pro

OA
with ABS Pro
or
OE
with ABS Pro
Ever since it introduced Race
ABS, BMW Motorrad has been
able to offer ABS tailored to the
specific needs and preferences
of supersport riders. ABS Pro
is an evolved functionality
based on Race ABS; it enables
ABS­assisted braking as a
function of bank angle with the
vehicle heeled over for cornering.
ABS Pro is an all-software up-
date of the ABS control unit and
the KOMBI control unit of the in-
strument panel.