BMW S 1000 RR Rider's Manual page 191

Always proceed in compliance
with the specified disconnec-
tion sequence.
First disconnect battery negat-
ive lead 1.
Then disconnect battery posit-
ive lead 2.
Connecting battery to
motorcycle
Connect battery positive lead 2
first.
Then install battery negative
lead 1.
with alarm system (DWA)
Connect battery positive lead 2
first.
Then install battery negative
lead 1.
Installing front seat (
Recharging battery
Disconnecting battery from
motorcycle ( 188).
Charge the battery using a
suitable charger.
Comply with the operating in-
structions of the charger.
Once the battery is fully
charged, disconnect the
OE
charger's terminal clips from
the battery terminals.
NOTICE
The battery has to be recharged
at regular intervals in the course
of a lengthy period of disuse.
See the instructions for caring
for your battery. Always fully re-
charge the battery before restor-
ing it to use.
Connecting battery to motor-
cycle ( 189).
Removing battery
63).
Removing front seat (
Disconnecting battery from
motorcycle (
Lift the battery up and out;
work it slightly back and forth
if it is difficult to remove.
9
189
z
63).
188).