Installing The Rear Wheel - BMW S 1000 RR Rider's Manual

9
176
Remove screw 1 and
disengage the brake line from
holder 2.
z
When rolling the rear wheel
clear of the motorcycle, take
care not to damage wheel-
speed sensor 1.
Roll the rear wheel to the rear
and clear of the swinging arm
and at the same time pull
brake-caliper carrier 1 back far
enough to allow the rear wheel
to clear it.
NOTICE
The sprocket and the spacer
sleeves on left and right are
loose fits in the wheel. When
removing, make sure that no
parts are damaged or mislaid.

Installing the rear wheel

ATTENTION
Change in tyre size
Effect on control systems
If the rear wheel tyre size is
changed from 190 / 55 ZR 17
to 200 / 55 ZR 17 or vice
versa, the parameters of
the control systems have to
be re-coded by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably