Front-Wheel Stand - BMW S 1000 RR Rider's Manual

5 without Dynamic Damp-
ing Control (DDC)
Adjusting compression-
stage damping for front
wheel ( 74).
without Dynamic Damp-
ing Control (DDC)
Adjust the rebound-
stage damping for front
wheel ( 75).
without Dynamic Damp-
ing Control (DDC)
Adjusting rebound-stage
damping for rear wheel
( 77).
without Dynamic Damp-
ing Control (DDC)
Adjusting compression-
stage damping for rear
wheel ( 76).
6 Spare fuses with puller tool
Miniature fuses, 4 A, 7.5 A
and 10 A
Puller tool for removing
fuses
6 Spare fuses
OE
7 Plastic adapter
with Dynamic Damping
Control (DDC)
Adjusting spring preload
for front wheel (
OE
8 Torx bit, T25
Removing and installing
body panels.
Removing front seat
( 63).
OE

Front-wheel stand

Installing auxiliary stand
at front wheel
OE
ATTENTION
Use of the BMW Motorrad
front wheel stand without ac-
companying use of centre
stand or auxiliary stand
Risk of damage to parts if vehicle
topples
Place the motorcycle on its
centre stand or another auxili-
ary stand before lifting the front
wheel with the BMW Motorrad

front-wheel stand.

OE
Place the motorcycle
on an auxiliary stand;
71).
BMW Motorrad recommends
the BMW Motorrad auxiliary
stand.
Install the rear-wheel stand
( 160).
Use basic stand (83 30 0 402
241) with the adapters (83 30
2 152 839).
9
159
z