BMW S 1000 RR Rider's Manual page 105

The infrared receiver available
as an optional accessory has to
be connected to the plug for
optional accessories located
underneath the right side panel
( 140).
In SETUP RACETRACK, the
LAPTIMER trigger mode has
to be set to LAPTM TRIG
AUTO or LAPTM TRIG EX-
TERN ( 126).
The headlight flasher button
can be used to operate the
instrument panel even when
the infrared receiver is installed.
To do so you must have the
LAPTIMER trigger mode set to
LAPTM TRIG AUTO or LAPTM
TRIG MANUAL.
A lap timeout can be defined to
stop the receiver from registering
completion of a lap prematurely
in response to spurious signals
( 126). Signals received before
this time elapses are ignored.
Interrupting timing
Requirement
Timing is running.
Long-press TRIP 1 to interrupt
timing.
Long-press TRIP 1 again to
resume timing.
Ending timing
Requirement
Timing is running.
Long-press TRIP 1 to pause
timing.
Short-press button 2.
The time shown on the display
--:--:--
is deleted:
Timing is ended.
No lap time is saved in
memory.
Short-press TRIP 1 to exit the
lap timer.
NOTICE
If more laps are subsequently
timed, lap numbering resumes.
Lap numbering does not
restart with lap 1 unless all
7
103
z