BMW S 1000 RR Rider's Manual page 186

9
184
Install screw 1.
LED rear light
If LEDs in the rear light fail the
z
rear light has to be replaced. Un-
der these circumstances:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Replacing bulb for
number-plate light
Pull number-plate light bulb 1
out of the light housing.
Remove the bulb from the
socket.
Replace the defective bulb.
Bulb for number-plate
light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of foreign matter.
Push the bulb into the bulb
socket.