BMW S 1000 RR Rider's Manual page 141

Reversing shift pattern
ATTENTION
Riding with shift pattern re-
versal on public roads
Voiding of homologation for rid-
ing on public roads
Do not install the gearshift-pat-
tern reverser for riding on pub-
lic roads.
Clean threads 1.
Push protective cap 2 on to
selector rod 4.
Remove screw 3.
Remove the washer from
between the ball joint and the
gearshift lever.
Reposition selector rod 4 to-
ward threads 1.
Slip the screw through the ball
joint and the washer and in-
stall it in the threads for the
gearshift-pattern reverser.
Selector rod to gearshift
lever
Joining compound: Micro-
encapsulated or medium-
strength thread-locking com-
pound
8 Nm
Install the protective cap.
The gearshift-pattern reverser
for racing is set up.
with Pro shift assistant
Clean threads 1.
Push protective cap 2 on to
selector rod 4.
7
139
OE
z