General Instructions; Toolkit - BMW S 1000 RR Rider's Manual

General instructions

9
The Maintenance chapter de-
scribes straightforward proced-
158
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
z
work in the Repair Manual on
DVD for your vehicle, which is
available from your authorised
BMW Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.

Toolkit

1 Hook wrench
without Dynamic Damp-
ing Control (DDC)
Adjusting spring preload
for rear wheel (
2 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Removing and installing
body panels.
Removing front seat
( 63).
Replacing bulbs for front
and rear turn indicators
( 182).
3 Open-ended spanner
Width across flats 17
without Dynamic Damp-
ing Control (DDC)
Adjusting spring preload
for front wheel (
with Dynamic Damping
Control (DDC)
Adjusting spring preload
for front wheel (
4 Open-ended spanner
Width across flats 10/13
Removing battery
OE
( 189).
with Dynamic Damping
72).
Control (DDC)
Adjusting spring preload
for rear wheel (
5 Reversible-blade screw-
driver with star-head and
plain tips
OE
70).
OE
71).
OE
73).