BMW S 1000 RR Rider's Manual page 176

9
174
Hold left brake caliper 1 in
place and position cable
guide 2.
Install screws 3 and tighten to
z
the specified tightening torque.
Radial brake caliper to
axle mount
38 Nm
Secure the cable for the wheel-
speed sensor in the holder (ar-
row).
Insert the wheel-speed sensor
into the bore and secure it with
screw 1.
Hold right brake caliper 1 in
position, install screws 2 and
tighten to specified torque.
Radial brake caliper to
axle mount
38 Nm
Remove the adhesive tape
from the wheel rim.
Firmly pull the brake lever until
the pressure point is percept-
ible, and repeat this operation
several times.
Remove the rear wheel
Lift the motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Install the rear-wheel stand
( 160).
Slip wooden chocks or similar
under the rear wheel to prevent
it from dropping out after the
quick-release axle has been
removed.