BMW S 1000 RR Rider's Manual page 89

If an indicator showing an ASC
fault appears when ASC self-
diagnosis completes:
You can continue to ride. Bear
in mind that the ASC is not
available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
DTC self-diagnosis
with Dynamic Traction Control
OE
(DTC)
BMW Motorrad DTC performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
DTC telltale light slow-
flashes.
Phase 2
Pullaway test of the system
components with diagnostic
capability.
DTC telltale light slow-
flashes.
DTC self-diagnosis
completed
The DTC symbol no longer
shows.
Check all the telltale and warn-
ing lights.
DTC self-diagnosis not
completed
The DTC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed with the en-
gine running for the wheel
sensors to be checked: min
5 km/h)
If an indicator showing a DTC
fault appears after DTC self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the DTC function
is not available or the function-
ality might be subject to certain
restrictions.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
6
87
z