BMW S 1000 RR Rider's Manual page 182

9
180
Install bulb 5. Begin by seating
lug 6 and then press the bulb
into the socket.
Engage spring clip 4 in the
z
catch on left and right.
Connect connector 3.
Install the cover.
Replacing bulb for left
parking light
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 1.
Push down retainer 2 (using a
screwdriver if necessary) and
pull socket 3 out of the head-
light housing.
Remove bulb 4 from the
socket.