Tyres - BMW S 1000 RR Rider's Manual

Coolant, specified level
Between MIN and MAX marks
on the expansion tank (Engine
cold)
If the coolant drops below the
permitted level:
Top up the coolant.
Top up coolant
Remove the side panel
( 185).
Open cap 1 of the expansion
tank.
Top up coolant to specified
level.
Checking coolant level
( 168).
Close the cap of the expansion
tank.
Installing side panel (

Tyres

Checking tyre pressure
WARNING
Incorrect tyre pressure
Impaired handling characteristics
of the motorcycle, shorter useful
tyre life
Always check that the tyre
pressures are correct.
WARNING
Tendency of valve inserts to
open by themselves at high
riding speeds
Sudden loss of tyre pressure
Install valve caps fitted with
rubber sealing rings and tighten
firmly.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
186).
Check tyre pressures against
the data below.
Tyre pressure, front
2.5 bar (Tyre cold)
9
169
z