BMW S 1000 RR Rider's Manual page 185

Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Press bulb 2 in, turn it counter-
clockwise and remove it from
the light housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of dirt and foreign
matter.
Press bulb 2 in and turn it
clockwise to install it in the
light housing.
Working from the inboard side,
insert the glass into the light
housing and close the housing.
9
183
z