BMW S 1000 RR Rider's Manual page 138

with alarm system (DWA)
7
136
Install bracket 3 for the anti-
theft alarm.
Install body-bound rivet 2.
Secure plug 1 for the number-
plate carrier.
z
OE
Insert anti-theft alarm 2, enga-
ging it in bracket 3.
Install screw 4.
Connect plug 1 for the anti-
theft alarm.
Work plug 1 with the cable
through tail bottom section 2.
Connect plug 1, hold it in po-
sition and secure the cable tie
(arrow).
NOTICE
If the warning for bulb failure
is suppressed in preparation
for a race-track session, before
the motorcycle is ridden on
public roads the warning has
to be reactivated by opening
SETUP EQUIPMENT
the
submenu and selecting the
SETUP EQIP: WARN LAMP
ON
function.
Install the rear seat ( 63).