Dtc - BMW S 1000 RR Rider's Manual

DTC

with Dynamic Traction Control
OE

(DTC)

DTC adjustment
The DTC controls permissible
rear-wheel slip in accordance
with your selected riding mode.
SLICK USER
In the and
modes it is also possible to adapt
the system-imposed DTC set-
ting.
DTC Adapting
SLICK
Activate the
riding mode; to do so install the
coding plug, if applicable.
NOTICE
You can make changes to the
SLICK
DTC settings in the
USER
riding modes only.
NOTICE
It is also possible to adjust
the DTC settings while on the
move.
riding
USER
or
Short-press button 1 (
increase value 3.
WARNING
Loss of stability because of
and
rear wheel spinning when
DTC control is reduced.
Risk of falling
Reduce DTC for riding on ra-
cing circuits only.
Short-press button 2 (-) to re-
duce value 3.
Preset value 3 appears on the
multifunction display and is
between
+1 ... +7
rear wheel in a maximum of
seven steps.
corresponding to earliest DTC
intervention.
-1 ... -7
rear wheel in a maximum of
seven steps.
corresponding to latest DTC
intervention.
0
: factory setting
+
) to
DTC
status indicator and
value 3 suppressed: DTC is
switched on.
DTC switch-off
On very loose surfaces (for
example in a gravel trap of a race
track), the DTC's attempts to
control propulsive power might
reduce drive to the extent that
-7 +7
and :
: reduce slip at the
+7
is the value
: increase slip at the
-7
is the value
7
129
z