Coolant - BMW S 1000 RR Rider's Manual

Checking clutch-lever
9
play
168
Pull clutch lever 1 until resist-
ance is perceptible.
z
In this position, measure clutch
play A between the handlebar
fitting and the clutch lever.
Clutch-lever play
0.5...1.0 mm (at the handlebar
fitting, with engine cold)
Clutch play is out of tolerance:
Adjust the clutch-lever play
( 168).
Adjusting clutch-lever
play
To increase clutch play: turn
screw 2 in the tightening dir-
ection, i.e. into the handlebar
fitting.
To reduce clutch play: turn
screw 2 in the loosening direc-
tion, i.e. out off the handlebar
fitting.
Checking clutch-lever play
( 168).
Repeat the steps in this pro-
cedure until clutch play is set
correctly.

Coolant

Checking coolant level
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Check the coolant level in ex-
pansion tank 1. Viewing direc-
tion: From in front toward the
inside of the right side panel.