BMW S 1000 RR Rider's Manual page 58

RACE
: For riding on race cir-
4
cuits with stock tyres.
56
The following riding modes are
additionally available for selec-
tion:
with Pro riding modes
SLICK
: For riding on race
circuits with slicks (only with
coding plug installed).
with Pro riding modes
USER
: You can customise the
z
settings for all available func-
tions (ENGINE, ABS, DTC and
DDC) to suit your individual
preferences or the current
boundary conditions. Technical
understanding and an aware-
ness of how the various para-
meters interact are essential
(only with coding plug installed,
see the section entitled "Engin-
eering details").
The mode selected in this way
is retained with the engine-
characteristic, ABS, DTC and
DDC adaptation settings even
after the ignition has been
switched off.
When the
is selected: Note that ABS
OE
control for the rear wheel is
restricted (see the section en-
titled "Engineering details").
The values selected in the
OE SETUP USER-MODE
not remain permanently visible
on the display; instead, they
appear for a limited time and
only after the following events:
After each Pre-Ride-Check
when USER is the active riding
mode.
After a change to the USER
riding mode.
If button 1 (MODE) is pressed
when the riding mode is
USER, but there is no change
of riding modes.
SLICK
riding mode
do
Installing coding plug
with Pro riding modes
WARNING
Increased engine power
available in all riding
modes with coding plug
inserted, vehicles with power
reduction
Risk of accident
It is important for the rider in-
tending to use these more
sporty ride modes to familiar-
ise himself/herself with their
characteristics.
Do not use the coding plug for
riding on public roads.
Switching off ignition (
Removing front seat (
OE
41).
63).