BMW S 1000 RR Rider's Manual page 120

7
118
Press and hold down SET 2
until the parameter starts to
flash.
Repeatedly short-press TRIP 1
or SET 2 until the value you
want appears on the display.
z
When the value you want is
shown:
Press and hold down SET 2
until the value stops flashing.
The value is saved.
Exiting SETUP mode
Press and hold down TRIP 1
until the multifunction display
switches to the default display
mode.
A value that is still flashing will
be saved.
Alternatively: Repeatedly
press TRIP 1 or SET 2 until
SETUP ... EXIT
appears in
the submenu.
Long-press SET 2 to exit the
submenu.
SETUP ... ENTER
on the display.
Repeatedly press TRIP 1 or
SET 2 until
EXIT
Long-press SET 2 to exit the
SETUP MENU
SETUP MENU ENTER
pears on the display.
appears
SETUP MENU
appears on the display.
.
ap-