The Leading Edge Of The Image Is Sporadically Misaligned With The Original; Paper Creases; Offset Occurs - Kyocera TASKalfa 250ci Service Manual

(12) The leading edge of the image is sporadically misaligned with the original.

Copy example
Paper feed clutch 1/2, paper convey-
ing clutch, MP paper feed clutch, MP
paper conveying clutch or registration
clutch installed or operating incor-
rectly.

(13) Paper creases.

Copy example
Paper curled.
Paper damp.
Dirty separation electrode.

(14) Offset occurs.

Copy example
Defective cleaning blade of the drum
unit.
Faulty transfer belt cleaning.
Defective fuser unit.
Wrong types of paper.
Causes
Causes
Causes
Check procedures/corrective measures
Check the installation position and operation of paper feed
clutch 1/2, paper conveying clutch, MP paper feed clutch, MP
paper conveying clutch and registration clutch. If any of them
operates incorrectly, replace it.
Check procedures/corrective measures
Check the paper storage conditions.
Check the paper storage conditions.
Clean the separation electrode.
Check procedures/corrective measures
Replace the drum unit (see page 1-5-35).
Run maintenance item U107 (see page 1-3-58).
Replace the transfer belt unit (see page 1-5-37).
Replace the fuser unit (see page 1-5-41).
Check if the paper meets specifications. Replace paper.
2JZ/2JX/2JV/2H7
1-4-65