IBM X3950 X5 Problem Determination And Service Manual page 461

806f000d-040effff • 806f000f-220101ff
806f000d-040effff The Drive [StorageVolumeElementName] has been added.
Explanation: Hard drive 14 has been installed.
May also be shown as 806f000d040effff or 0x806f000d040effff
Severity: Info
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0162
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
806f000d-040fffff The Drive [StorageVolumeElementName] has been added.
Explanation: Hard drive 15 has been installed.
May also be shown as 806f000d040fffff or 0x806f000d040fffff
Severity: Info
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0162
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
806f000f-220101ff The System [ComputerSystemElementName] has detected no memory in the system.
Explanation: IMM has detected that there is no memory in the system.
May also be shown as 806f000f220101ff or 0x806f000f220101ff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0794
SNMP Trap ID: 41
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
445
Appendix B. Integrated management module error messages