IBM X3950 X5 Problem Determination And Service Manual page 163

Types 7145, 7146, 7143, and 7191

Hide thumbs Also See for X3950 X5:

Table of Contents

To remove the RAID adapter carrier and RAID adapter assembly, complete the

following steps.

1. Read the safety information that begins with "Safety" on page v, "Installation

guidelines" on page 97, and "Handling static-sensitive devices" on page 100.

2. Save the system configuration.

3. Turn off the server and peripheral devices, and disconnect the power cords

and all external cables as necessary to replace the device.

4. Remove the top cover (see "Removing and replacing consumable parts and

Tier 1 CRUs" on page 105).

5. Remove the top cover bracket (see "Removing the top-cover bracket" on page

6. Pull the blue handle on the RAID adapter carrier up to remove it from the

7. Disconnect the SAS cables from the RAID adapter.

8. Press the release latch and remove the RAID adapter from the carrier.

Chapter 5. Removing and replacing components

Show Quick Links

Table of Contents