IBM X3950 X5 Problem Determination And Service Manual page 135

Types 7145, 7146, 7143, and 7191

Hide thumbs Also See for X3950 X5:

Table of Contents

About this task

To remove the operator information panel assembly, complete the following steps.

1. Read the safety information that begins with "Safety" on page v and

"Installation guidelines" on page 97.

2. Turn off the server and peripheral devices, and disconnect the power cords and

all external cables as necessary to replace the device.

3. Remove the front bezel and the top cover (see "Removing the front bezel" on

page 108 and "Removing and replacing consumable parts and Tier 1 CRUs" on

4. Remove the memory cards or fillers from slots 5, 6, 7, and 8 (see "Removing a

memory card" on page 136).

5. Disconnect the operator information panel (front panel) cable from the

microprocessor board, see "Microprocessor-board connectors" on page 24.

6. Press the blue release button above the assembly and carefully pull the

assembly out of the server. Make sure that you do not damage the cable as you

remove the assembly from the server.

7. Disconnect the cable from the rear of the operator information panel.

8. If you are instructed to return the operator information panel assembly, follow

all packaging instructions, and use any packaging materials for shipping that

are supplied to you.

Chapter 5. Removing and replacing components

Show Quick Links

Table of Contents