IBM X3950 X5 Problem Determination And Service Manual page 152

Types 7145, 7146, 7143, and 7191

Hide thumbs Also See for X3950 X5:

Table of Contents

Removing a memory card:

This topic provides instructions for how to remove a memory card.

About this task

At least one memory card with one pair of DIMMs must be installed for the server

to operate correctly.

To remove a memory card, complete the following steps.

1. Read the safety information that begins with "Safety" on page v and

2. Turn off the server and peripheral devices, and disconnect the power cords and

3. Remove the top cover (see "Removing and replacing consumable parts and Tier

4. Slide the blue release lever to the unlocked position (toward the rear of the

5. If necessary, remove all DIMMs.

IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide

"Installation guidelines" on page 97.

all external cables as necessary to replace the device.

Attention: To ensure proper cooling and airflow, do not operate the server for

more than 2 minutes with the top cover removed.

1 CRUs" on page 105).

server) and open the retention levers; then, lift the memory card out of the

Show Quick Links

Table of Contents