IBM X3950 X5 Problem Determination And Service Manual page 426

80070301-0304ffff • 80070301-1e83ffff
80070301-0304ffff Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state.
Explanation: IMM has detected that the temperature for CPU 4 has transitioned to a non recoverable state.
May also be shown as 800703010304ffff or 0x800703010304ffff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0524
SNMP Trap ID: 0
Automatically notify Support: No
User response: Complete the following steps:
1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
4. Make sure that the microprocessor 4 heat sink is securely installed.
(Trained service technician only) Make sure that the microprocessor 4 heat sink is installed correctly and the
5.
thermal material is correctly applied.
6. (Trained service technician only) Replace microprocessor 4.
80070301-1e83ffff Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state.
Explanation: An internal system element has reached an over-temperature state.
May also be shown as 800703011e83ffff or 0x800703011e83ffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0524
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Check for and correct any system fan errors.
2. Make sure all server air passages are clear of debris or dust.
3. (Trained service technician only) Replace the I/O board.
410
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide