IBM X3950 X5 Problem Determination And Service Manual page 439

Types 7145, 7146, 7143, and 7191
Hide thumbs Also See for X3950 X5:
Table of Contents

Advertisement

6.
4. If the Checkpoint display repeatedly blinks F:A then 6:9
7.
- (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-140bffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A CPU VRD failure has occurre.
May also be shown as 80070608140bffff or 0x80070608140bffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1.
Critical: Do Not attempt to power the system on, or AC cycle.
2.
1. If local, pull out the Operator Information Panel, observe and make note of what is being displayed on the
Checkpoint display for support reference.
3.
2. Using the IMM web interface, capture a 'Service Data' file (note:) for support reference.
4.
3. If the Checkpoint display repeatedly blinks F:A then 6:8.
5.
- (Trained service technician only) Replace the CPU board
6.
4. If the Checkpoint display repeatedly blinks F:A then 6:9
7.
- (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-140cffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A CPU VRD failure has occurre.
May also be shown as 80070608140cffff or 0x80070608140cffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1.
Critical: Do Not attempt to power the system on, or AC cycle.
2.
1. If local, pull out the Operator Information Panel, observe and make note of what is being displayed on the
Checkpoint display for support reference.
3.
2. Using the IMM web interface, capture a 'Service Data' file (note:) for support reference.
4.
3. If the Checkpoint display repeatedly blinks F:A then 6:8.
5.
- (Trained service technician only) Replace the CPU board
6.
4. If the Checkpoint display repeatedly blinks F:A then 6:9
- (Trained service technician only) Replace the CPU board and I/O board assembly
7.
80070608-140bffff • 80070608-140cffff
Appendix B. Integrated management module error messages
423

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X3850 x5

Table of Contents