IBM X3950 X5 Problem Determination And Service Manual page 405

40000036-00000000 • 40000038-00000000
40000036-00000000 IPv6 stateless auto-configuration disabled by user [arg1].
Explanation: IPv6 stateless address auto-configuration has been disabled on the Integrated Management Module by
the specified user.
May also be shown as 4000003600000000 or 0x4000003600000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0054
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000037-00000000 ENET[[arg1]] IPv6-LinkLocal:HstName=[arg2], IP@=[arg3] ,Pref=[arg4] .
Explanation: The IPv6 link-local address is active.
May also be shown as 4000003700000000 or 0x4000003700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0055
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000038-00000000 ENET[[arg1]] IPv6-Static:HstName=[arg2], IP@=[arg3] ,Pref=[arg4], GW@=[arg5] .
Explanation: The IPv6 static address is active.
May also be shown as 4000003800000000 or 0x4000003800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0056
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
389
Appendix B. Integrated management module error messages