IBM X3950 X5 Problem Determination And Service Manual page 154

Types 7145, 7146, 7143, and 7191

Hide thumbs Also See for X3950 X5:

Table of Contents

1. Read the safety information that begins with "Safety" on page v and

2. Turn off the server and peripheral devices, and disconnect the power cords and

3. Remove the top cover (see "Removing and replacing consumable parts and Tier

4. Remove the memory card (see "Removing a memory card" on page 136).

5. Place the memory card on a flat, static-protective surface, with the DIMM

6. Open the retaining clip simultaneously on each end of the DIMM connector

7. If you are instructed to return the DIMM, follow all packaging instructions, and

Replacing a DIMM:

This topic provides instructions for how to install the replacement DIMM.

About this task

To install the replacement DIMM, complete the following steps:

1. Open the retaining clip on each end of the DIMM connector.

2. Touch the static-protective package that contains the DIMM to any unpainted

3. Turn the DIMM so that the DIMM keys align correctly with the connector.

IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide

"Installation guidelines" on page 97.

all external cables as necessary.

1 CRUs" on page 105).

connectors facing up.

Attention: To avoid breaking the DIMM retaining clips or damaging the

DIMM connectors, open and close the clips gently.

and remove the DIMM from the connector.

use any packaging materials for shipping that are supplied to you.

metal surface on the server. Then, remove the DIMM from the package.

Show Quick Links

Table of Contents