CHAPTER 9
Power Requirements and Specifications
SRX550 High Memory Services Gateway Electrical Wiring Guidelines
Copyright © 2016, Juniper Networks, Inc.
SRX550 High Memory Services Gateway Electrical Wiring Guidelines on page 63
SRX550 High Memory Services Gateway Supported AC Power Cords on page 64
SRX550 High Memory Services Gateway AC Power Supply Electrical
Specifications on page 66
SRX550 High Memory Services Gateway DC Power Cable Specifications on page 66
SRX550 High Memory Services Gateway DC Power Supply Electrical
Specifications on page 67
Table 28 on page 63
describes the factors you must consider while planning the electrical
wiring for the SRX550 High Memory Services Gateway at your site.
CAUTION:
It is particularly important to provide a properly grounded and
shielded environment and to use electrical surge-suppression devices.
Table 28: Site Electrical Wiring Guidelines for the SRX550 High Memory
Services Gateway
Site Wiring Factor
Guideline
Signaling limitations
To ensure that signaling functions optimally:
Install wires correctly.
Improperly installed wires can emit radio interference.
Do not exceed the recommended distances or pass wires between
buildings.
The potential for damage from lightning strikes increases if wires exceed
recommended distances or if wires pass between buildings.
Shield all conductors.
The electromagnetic pulse (EMP) caused by lightning can damage
unshielded conductors and destroy electronic devices.
63